After removing all cartridges, remember to wipe down any excess ink before reinserting them into their slots. If that happens, the ink may dry and clog the nozzles.

However, a hard reset using any of the methods discussed should solve the problem.īe that as it may, it’s important to complete a hard reset of your computer as quickly as possible because your cartridges should not be disconnected from your printer for more than 30 minutes. Being unable to use a full cartridge because the printer doesn’t recognize it is even more frustrating.

Low ink level is a situation that can make any HP printer owner worried if they don’t have a replacement at hand. Although there may be specific ways to deal with this in some of the latest models, these reset methods work well across both the old and the new generation HP printer models. What HP Printer Models Will This Work For?Ĭartridge refill problems are relatively common. This method uses several empty cartridges to erase your printer’s memory. Your printer should now indicate that the cartridge is full.

After the alignment, remove the cartridge and then take off all the pieces of tape on it.

Insert the cartridge back in the HP printer and print an alignment page yet again.

Without removing the tape that’s already on the upper side of your cartridge, tape the lower-left corner.

As before, ignore any error messages your printer displays in the process.

Reinsert the cartridge and proceed to print an alignment page.

Next, cover the contacts on the top right corner of your cartridge with tape.

After the alignment is complete, remove the cartridge once again but leave the tape in position.

You can ignore that as it won’t affect the reset process. By default, the printer may display a message suggesting that the cartridge has problems.

At this point, insert the cartridge back in the HP printer and immediately print an alignment page.

Cover the contacts on the top left corner of your cartridge with a piece of tape.

After that, turn the cartridge around so that the contacts are on the lower side.

First, ensure that you can see the contacts of your cartridge by turning it over.

The goal is to restore ink level monitoring. This method works by covering the cartridge contacts used to gauge the ink level. You can reset your HP printer in two ways. And the good thing about it is that it can also work if you’ve replaced HP cartridges with some other compatible option from another vendor. Whenever this happens, resetting your printer should be first on the list of your troubleshooting options.

Hp resetter